A pair of 10mm to 15mm pushfit flexi tap tails..

As used by some manufacturers on shower valves when the cranked legs supplied are not long enough. The are 3/4" - 1/2" straight leg complete with new cover plates and back nuts...

Access door panel can be used to hide/lock away gas and water taps to prevent easy access or accidental turning on/ off. To fix the panel a hole size is required - 154mm x 204mm, (12mm lip). The frame fixes to the wall with 4 screw holes then the door can then slot into the frame and is secured closed using the pinch lock...

Flexible foam pipe insulation for hot and cold pipes, cuts heat loss by up to 70% and protects against freezing. Sold in 2 Metre lengths..

Access door panel can be used to hide/lock away gas and water taps to prevent easy access or accidental turning on/ off. To fix the panel a hole size is required - 154mm x 204mm, (12mm lip). The frame fixes to the wall with 4 screw holes then the door can then slot into the frame and is secured closed using the pinch lock...

Access door panel can be used to hide/lock away gas and water taps to prevent easy access or accidental turning on/ off. To fix the panel a hole size is required - 154mm x 204mm, (12mm lip). The frame fixes to the wall with 4 screw holes then the door can then slot into the frame and is secured closed using the coin lock...

Access door panel can be used to hide/lock away gas and water taps to prevent easy access or accidental turning on/ off. To fix the panel a hole size is required - 154mm x 204mm, (12mm lip). The frame fixes to the wall with 4 screw holes then the door can then slot into the frame and is secured closed using the coin lock...

VCFL Straight Boiler Filling Loop With Capping Kit..

Brass long running nipple 1/2" - 2" longParallel threaded ends to ISO 28..

The 10mm pipe seal is designed to push fit directly into a 25mm diameter hole. The barbs down the side will grip into the floor to give a secure fixing. This seal is ideally suited for a 10mm radiator pipe or cable going through a floor or other surface. Tail length 27mm, 10mm ID...

This product is made up of 2 components, a solid plastic surround to provide a firm base to screw through. The second component is a rubber like diaphragm, which can stretch from 5-11mm and provides a tight seal around any pipes or cables it surrounds...

Washing Machine Tap Straight 15mm x ¾"Another handy use for them is to replace your drain cocks with the these taps. Makes the drain off so much easier .Supplied with both red and blue tops..

Grey polybutylene barrier pipe. Suitable for hot and cold plumbing and central heating systems , including combi boilers. This pipe is WRAS approved .3m Length* Remember to use with our pipe inserts *..

Talon Snap-in Open Clip 15mm SingleMade in the UK from a premium grade polymer.Suppled in a pack of 100 clips..

This product is made up of 2 components, a solid plastic surround to provide a firm base to screw through. The second component is a rubber like diaphragm, which can stretch from 10-19mm and provides a tight seal around any pipes or cables it surrounds...

Talon Snap-in Open Clip 15mm SingleMade in the UK from a premium grade polymer.Suppled in a pack of 10 clips..

The 15mm pipe seal is designed to push fit directly into a 25mm diameter hole. The barbs down the side will grip into the floor to give a secure fixing. Tail length 60mm, 15mm ID. White..

The 15mm pipe seal is designed to push fit directly into a 25mm diameter hole. The barbs down the side will grip into the floor to give a secure fixing. Tail length 60mm, 15mm ID. Beige..

Thread sealing tape for potable water (WRAS approved) BS7786..

WRAS approved standard bore pushfit flexi tap conn 15mm x 1/2" x 300mm long..